| Customization: | Available |
|---|---|
| Application: | Granite/Sandstone |
| Product Name: | Wanlong Wire Saw |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The wire saw is used for cutting quarries, for squaring blocks or special-shaped block processing.
Three essential components for diamond wire saw are as followed:
1. Steel cable with diefferent diameter depending on the application
2. Sintered diamond beads.
3. Fixed method: springs, rubber or plastic. Protects the steel cable because of stone abrasive, and also sbsorbs the energy of the cutting friction of the beads against the stone.
Our advantages:
1. High efficiency, safe, low-noise, less-dust, and enviroment-friendly.
2. Good cutting with small slot.
3. Few breakage raito at working thus sound lifetime.
4. Professional engineers, experienced workers, strict quality control system, top quality material etc. ensure the stable quality.
5. Other specifications are available upon request.
| Products | Application | Diameter(mm) | Fixed method |
| Vacuum brazed wrie saw | For marble, limestone, travertine quarry | 11.0 | spring |
| For marble, limestone, travertine block squaring | 11.0 | spring | |
| Diamond wire saw for granite, Sintered | For quarry | 11.5 | rubber |
| For squarring | 11.0 | plastic | |
| For profiling | 8.8 | plastic | |
| Diamond wire saw for marble, Sintered | For quarry | 11.0 | spring |
| For squarrying | 11.0 | plastic | |
| For profiling | 8.8 | plastic |
Diameter (mm) |
Connection | Beads/meter | Linear Speed(m/s) | Application |
|---|---|---|---|---|
| 8.5/8.8 | Plastic+spring | 37 | 20-30 | Granite Sandstone |
| 11 | Plastic | 40 | 20-30 | Granite Sandstone |
| 11.5 | Plastic | 40 | 20-30 | Granite Sandstone |
| 11.5 | Plastic+spring | 40 | 20-30 | Granite Sandstone |
| 8.5/8.8 | Plastic | 37 | 25-35 | Marble |
| 11 | Spring | 28 | 25-35 | Marble |
Attention:
1. Regular inspections of diamond wire self rotation and adjust in time.
2. Regular inspections of diamond wire abrasion to avoid cut-in-one-side problem happened, and make the solution in time if occurs.
3. Regular inspections the joint, as well as the beads of two sides, if they are abrase badly, replaces them in time.
4. The steel cable tension of the stationary machines should be controlled within 250-300kg(φ4-5mm).
5. Linear speed is ajusted according to stones hardness.
6. For the new wire, when start to cut, its linear speed should be slower 2-3m/s than the standard mentioned above, it is good for sharpen.
){kind=link}